FritzBox 7530 AX Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
35° Stand for FritzBox 7530 AX for reduced footprint and better visibility.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for my FritzBox 7530 AX to keep it at 35° for reduced footprint and better status-LED visibility.
There are four notches and two stubs to mechanically interface with the router and hold it in place. On the bottom side there are four hexagonal notches for ikea's (smaller) felt stickers; you can, but don't have to use those.
On the backside, there are notches for 5mm x 1mm magnets. These can be used together with the three sizes of cable holders to cable manage all the electrical / data connections to your router. They might not, however, work well with stiff LAN-cables...