SSUPD Meshroom D Better Bottom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Noctua fan shroud bottom in place of flimsy Meshroom D stock bottom
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I hated the bottom of my SSUPD Meshroom D case as well as the look of my GPU. I stripped the shroud off the GPU and designed this mod for the bottom of the case to replace the fans of GPU as well as provide more structure to the bottom of the case. Using the Noctua NF-A14x25 G2 PWM Sx2-PP fans and Noctua NA-FG1-14 Sx2, Fan Grills for 140mm Fans I was able to space the fans to be pressing against GPU heatsinks and then remake the bottom with the cool fan grills. I also made new feet of two styles for this guy. The first set were just round but they were ugly so there is a square version as well. The feet are a little taller than stock to provide adequate airflow. The stock feet height left my GPU about 5-10 degrees C hotter than these taller ones.
To assemble, just print, tap the holes in the backer plate and screw it all in with 6-32 screws. You'll need to do some shimming/adjusting for fans if you decide to do this. I printed everything in black polylight ASA but even PLA should work. Nothing is getting terribly hot down here.