1 / 3
Filter and funnel to fit Coffee Filters. — zdjęcie 1
1 / 3

Filter and funnel to fit Coffee Filters.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a two-part basket and funnel for filtering liquids using a standard 8-12 cup coffee filter.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This model is a remix of https://www.printables.com/model/184771-filter-sieve/ to increase the diameter and Filter Basket height to work with a "standard" American 8-12 cup (#4) paper coffee filter.  I'm using it for chemistry, but it could also be useful in the kitchen too, with the usual caveats about 3D printing and food safety.

The basket can be printed in vase mode above 3.5mm but having tested this I don't recommend it.  It makes the basket rather "floppy". I much prefer the more rigid model.  To print the funnel, flip the part and print it with the narrowest part pointing up.

For parts not printed in vase mode, the "scarf seams" option in PrusaSlicer helps keep the models watertight.

I chose not to glue these parts together, as having them separate makes them easier to clean.  It does make them slightly less stable, so consider that before choosing. 

Special thanks to the original author for publishing the Fusion F3D file to make this remix easier. 💖💖💖

Tagi