Caliper Radius Gauge – Corner Radius up to 130 mm (prints without support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact radius gauge for measuring corner radii with a caliper. Covers radii from 0 to ~130 mm
- Ocena
- 4,459 / 5
- Polubienia
- 1676
- Pobrania
- 4686
- Wydruki
- 35
- Wyświetlenia
- 31 894
- Oceny
- 37
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This radius gauge allows you to determine the corner radius of parts using a standard caliper.
Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers.
To calculate the corner radius, multiply the caliper reading by 2.4142.
The formula is engraved directly on the tool, together with quick-reference radius values: 5, 10, 15, 20, 25, 30, 40 and 60 mm.
The model is optimized for 0.2 mm layer height, prints without supports, and is designed for clean results on typical FDM printers.
For best readability of the markings, pause the print before layer 41 and change filament color.
Radius-Messwerkzeug zur Bestimmung von Eckenradien mit dem Messschieber.
Messbereich 0 bis ca. 130 mm.
Getestet mit Mahr MarCal und einem einfachen Messschieber – passend für die meisten Modelle.
Der Eckenradius ergibt sich aus dem Messwert × 2,4142.
Formel sowie Referenzwerte (5, 10, 15, 20, 25, 30, 40, 60 mm) sind direkt angebracht.
Optimiert für 0,2 mm Layerhöhe, druckbar ohne Support.
Für gute Lesbarkeit: Druckpause und Filamentwechsel vor Layer 41 einfügen.