1 / 2
OZOBOT Bit case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Bit Case
Protect your Ozobot Bit robot when it's riding around in your backpack or pocket. This little case keeps the Bit from turning on accidentally and keeps debris out of the optical sensors. Print it in two pieces and snap the hinge together.
Printing instructions for FDM printers: Send the .STL files to your preferred slicer. The case bottom needs to be flat side down. The case top needs to have the open side down. The case top will require supports. Printing with a raft is suggested. Print with a layer height no smaller than 0.2mm. Follow your filament’s recommendations for print temperature and speed.