1 / 3
IKEA Skadis - Amiibo holder for Kirby Air Riders — zdjęcie 1
1 / 3

IKEA Skadis - Amiibo holder for Kirby Air Riders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IKEA Skadis pegboard amiibo holder for the larger Kirby Air Riders amiibo.

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The new Kirby Air Riders amiibo are too big for standard holders/stands, so I made my own.

Quick and low material amiibo holder for use with IKEA Skadis pegboard system and the Skadis T-Clip System. It took 16 minutes and 6.6g of filament to print on my Elegoo Centauri Carbon. 

Make sure to print both the model and the T-Clip to be able to mount it. The model should be printed open circle face down, level with the slot. 

First, insert the T-Clip fully into the slot. Then, turn the model sideways and attach it onto the Skadis pegboard. Finally, rotate the model 90° back to horizontal, and drop in your amiibo :). For removal, remember to remove your amiibo first! It can be helpful to turn the model from the pegboard end, as opposed to where the open hole is. 

Tagi