Thermostat box for leavening cell + Sensor stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for thermostat W3230 and stand for its temperature sensor
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife wanted to make a Panettone, so she requests me to build a leavening cell.
I bought a W3230 thermostat (Amazon link) and a heating cable (Amazon link), both working at 220V, plus the wire to connecting both to my wall socket.
Thermostat box
To make everything nice looking, I designed the thermostat box so that I could hang it to the oven's door handle. It's made of 3 parts, to ease printing.
You can find the Fusion 360 projects I made, so you can adjust the hook side to your necessities, or adjust the holes at the bottom, or even the sensor stand.
Everything is printed in PETG so it can stay in the oven with 25-30°C without deforming. PLA will deform overtime so I would not use that for this project.
Heating cable panel
I used a plywood panel to lay down the hearing cable, which is kept down with some plastic cable clamps, large enough for the cable.
It's large enough so it can slide in like a regular oven rack.