Taurus TX 22 loader thumb saver speed loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to load Taurus TX 22 pistol magazines. Good for extended mags with much longer springs than stock.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 248
- Wydruki
- 1
- Wyświetlenia
- 1262
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed https://www.thingiverse.com/thing:4631830 to fit my Taurus TX 22 mags.
I installed printed mag extensions so had to remove the pin that runs through the feeder and sticks out the sides of the mag and all the speed loaders I could find require using the pin through the side of the feeder to compress the spring. This compresses from the top so if you had to remove the pin from the feeder you can still have some help to load the last few rounds if you have a hard to compress spring.
I printed in PLA with tree supports.
I used 35% infill.
Print upside down as seen in the pictures.