Stand for 5‑liter water reservoir
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular stand for a large water dispenser bottle.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
This is a model of a stand/pedestal for a 5‑liter water reservoir. It consists of a base and three feet connected by dovetails. Included are three types of bases and two types of feet (70 mm and 90 mm height).
Base types:
A variant for a glass with a more square-shaped base and a large corner radius. The main diameter is around 144 mm, and the base diameter is 110 mm. There is a rather large fillet at the bottom.
A variant with a main diameter of 145 mm and a base diameter of 135 mm. There is a chamfer at the bottom. The water reservoir (with the yellow outlet and cap) is available at TEDI in Germany.
A flat variant with a diameter of 167 mm — probably the most useful for you.
For other sizes, simply scale the base and feet by a factor of your choice.
My print settings:
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 4
Infill: 10% gyroid
Material: PLA
Supports: Yes, below dovetail (see pictures)
Gluing the parts together is not necessary. I’ve included a dummy for testing the scaling factor if you want a tighter connection.
Happy printing!