1 / 9
Achat 204A IEC to PowerCON mounting adapter — zdjęcie 1
1 / 9

Achat 204A IEC to PowerCON mounting adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting adapter used to replace the factory fitted IEC connector with PowerCON inlet on the box pro Achat 204A

Ocena
0 / 5
Polubienia
6
Pobrania
29
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

Tired of IEC connectors falling out?

At least for equipment used on professional events, that is a no-go. That's why I created this adapter to replace the factory fitted IEC connector with PowerCON inlet on my box pro Achat 204A (not the most professional equipment but close enough - as neat little infill e.g.).

Mounting is straight forward (all M3) and can be seen on the pictures. V3 is preffered from my point of view, but I added the V2 as well, which places the PowerCON inlet a bit recessed from the backplate (compare last two pictures).

Don't forget to include the fuse (originally mounted inside the IEC inlet - T2,5A 250V) again, i.e. as an inline fuse.

Might be suitable to convert other speaker (especially Achat X04 series) as well. Please let me know in the comments in case you tried.

Tagi