1 / 3
Pokemon card box in Pokeball style size-collection-to-be — zdjęcie 1
1 / 3

Pokemon card box in Pokeball style size-collection-to-be

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I redesigned Tonyk's Pokeball styled Pokemon card box to be thinner and not have air-gaps, and more variants.

Ocena
0 / 5
Polubienia
2
Pobrania
26
Wydruki
0
Wyświetlenia
189
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Redesigned the Pokemon Pokeball box to be slightly thinner, as the original design had air-gaps, and wanted to use less plastic. The thin box uses the same 4 walls instead of 4, but adjusted them to hopefully be perfect dimensions for 4 walls equally snug together. 
But also made it different by eventually including multiple lengths as well. 

NB! It's still in prototype/testing phase, so any feedback is welcome, as i'm not used to making variations based on other printers/tolerances. So i highly recommend tuning flow to not overextrude, as these prototype files are all tuned to be nice and flush on my heavily modified ender 3 pro.

I have cad setup for several sizes and variations, planned for pro-fit inner sleeve

_____________________

What is so far printed and tested on my own printer:
---
Card box to hold 100 pro-fit inner sleeved cards with no pressure put on the cards with a few mm tolerance between box and cards.
___________________________

What is designed ready for testing:
---
double, triple, quadruple length boxes. they will be adjusted to sit flush against smaller boxes. 
___________________________


what is planned:
---
A smaller box to fit 1 deck of 60 cards. including a variant with magnets to hold the lid better during travels to battles.

Tagi