KeyMini: The Minimalist Hybrid Key Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
By combining a flexible TPU exterior with a rigid PLA core, this organizer offers a premium feel with industrial-strengt
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 717
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Following the success of the original KeyCarry, the KeyMini is a ultra-slim, rugged evolution designed for those who value pocket space. By combining a flexible TPU exterior with a rigid PLA core, this organizer offers a premium feel with industrial-strength durability.
Read the printing instructions!!! This is an ideal project for beginners looking to move beyond basic prints and learn about manual inserts and multi-material printing. |
🛠 Hardware Required
To complete this build, you will need:
Chicago Screws: 5mm diameter (also known as Bookbinding screws). Note: Use 4mm if your keys have narrow holes.
Washers: To fit your chosen screws.
Superglue: For securing the internal core.
Threadlocker (Optional): Highly recommended for a "set it and forget it" assembly.
🖨 Printing Instructions
This model uses a "Printed Insert" technique. Follow these steps for a perfect result:
The Core: Print the two PLA core pieces first and set them aside.
The Shell: Start your TPU print. My provided print profile includes a pause at Layer 11.
The Insert: When the printer pauses, place a small dab of superglue into the TPU grooves and insert the PLA cores. Tip: The glue prevents the nozzle from accidentally dislodging the cores when printing resumes.
The Finish: Resume the print. The printer will bridge over the PLA to lock it permanently inside.
Bed Removal: Use a little Isopropyl Alcohol (IPA) around the edges to help release the TPU from the build plate safely.