PackMod modular system v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This system is just a rail and bit of Rubbercord. It's kinda modluar in the sense that this is the first and main Part.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Open Community License v1
You can make your own Part or wait for some other modules are aviable. The rail is so you can slide in the modlues and print them seprate. it's for rubberrope of a 2.5 mm diameter. This is the first version with more to come if Problems are found. The width of useable space is 55 and 110 in length. The Stencil can be cut in two parts and therefore be even more modular with the option of two lower profil modules. I recommend that you use supports only under the overhangs for the rest it is not needed. There is now also an adpter plate so you can also only use one halfmodule.