MMU3 / MMU2s Labelplate With Holder for E3D V6 Nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small upgrade for the MMU2s/MMU3 when used for printers using E3D V6 nozzles.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Small upgrade for the MMU2s/MMU3 when used for printers using E3D V6 nozzles. Created to hold 0.25, 0.4, 0.6, and 0.8 nozzles as these are the standard profiles in prusaslicer for mk2.5, mk3, and mk3.5 printer families. Uploaded as both recessed and raised lettering for single color print and as multiple parts for multicolor. Holes are 6mm diameter so they are a bit tight, but it will not damage the nozzle when screwing in. This also helps keep the nozzle secure in the holder. Keep in mind it needs to cool a bit right after changing it out from the printer.
In order to prepare the model for multicolor just open prusaslicer and open all the 10 files in the folder at the same time. The slicer will ask if it should consider the objects as parts of a single object, choose yes. The slicer might think the smallest files are in inches, not mm. This is not correct and you should choose not to recalculate the dimensions
