Micro KNEX Leg Support Rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed Support for Experimenting with KNEX Robotics servo rigs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This model is a 3D-printed support designed for experimenting with Micro K’NEX servo rigs. It holds a single servo rig in a stable and repeatable position, making it suitable for studying inverse kinematics using appropriate control software.
The support can be used:
Free-standing on a work surface, or
Bolted or screwed down for increased stability during testing
Mounting & Hardware
Mounting holes: 4 mm diameter
A 3D-printed spacing washer is included to remove any slack in the structure
Four spacing washers are required for correct assembly
Intended Use
This support is intended for:
Robotics experimentation
Inverse kinematics testing
Educational and prototyping use with Micro K’NEX-based servo rigs