1 / 8
Crash Derby Transformer: Škoda Fun → Josef Průša — zdjęcie 1
1 / 8

Crash Derby Transformer: Škoda Fun → Josef Průša

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yes, you are reading it correctly! A Škoda Felicia Fun that transforms into a Josef Průša Mech! Perfect for Crash Derby

Ocena
0 / 5
Polubienia
22
Pobrania
41
Wydruki
0
Wyświetlenia
559
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Share Alike

When I saw the Crash Derby game I really really wanted to create a transformer! Maybe impossible at this scale but I like a challenge :)

But what car to choose? American muscle and pick-ups clearly fit a crash derby but I personally really prefer smaller and quirkier cars. So when I discovered the 1997 Škoda Felicia Fun, a Czech classic, there was no turning back!!



As predicted it was a very very big challenge to make it printable at the minuscule scale and with a standard 0.4mm nozzle, but it works! At first I tried to print all components separate and click them together because I was struggling to find room for reliable print in place axles but after some experimentation the click together parts weren't reliable at this scale so I had to integrate the axles (which worked perfectly in the end).

Finally I created a second version with the transformer face replaced with a miniature remix of a Josef Průša model, completing the Czech classic combo!

The model prints in multiple parts and the axles need a drop of glue. You can either print the parts in single colors or print the multi color version if you have a MMU or equivalent. (You can also color in the windows with a sharpie) I printed at a 0.12mm layer height and I only used a small brim for the front axle/wheels.

I found it works best to snap the rear axle in place first and then glue everything together upside down so you can align the axles/wheels using the base (see image). Make sure to dry-fit the axles first since there is a 0mm tolerance (press fit), but at this scale it ranges from loose to needing post processing depending on printer and settings.

I really hope you like the model!

Other than that, have fun with the model!

Happy printing and gaming!
- Rossero

Tagi