Dasai Mochi DIY with 16340 LiIon battery and 1.3" oled display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a great project.Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 426
- Wydruki
- 0
- Wyświetlenia
- 2493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817
I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00 switch. No glue or screws are required for construction. Everything fits perfectly and is very stable.
The code and wiring diagram are available here: https://themochi.huykhong.com/
The main housing and backplate are printed from PETG with a resolution of 0.15 mm. The remaining components are printed from PLA with a resolution of 0.2 mm.
Category: Toys & Games
