Braille " Do not touch "
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a practical joke, it's the warning "Do not touch" written in braille. I added another one with text as a hint.…
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 192
- Wydruki
- 2
- Wyświetlenia
- 1599
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a practical joke, it's the warning "Do not touch" written in braille. I added another one with text as a hint.
I tested a few translators and decided to use this one: https://www.mathsisfun.com/braille-translation.html
I sized the text according to the measurements given by http://www.brailleauthority.org/sizespacingofbraille/sizespacingofbraille.pdf:
"A Braille dot must have a diameter of 1.44 mm and a height of 0.48 mm. The distance between 2 points of the same character (horizontally or vertically) must be 2.34 mm. The center distance between 2 identical points of 2 consecutive characters must be 6.20 mm."
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Notes:
Print with a color change at the height of the first text layer. I used PrusaSlicer, which added a M600, feel free to use something else, this is not a difficult print.
The original scale matches the specification for braillie, scale it up if you want to use it a bit more comfortably.
Category: Signs & Logos