TPU Muffler for Allen Bradley 855HM Series Horns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU muffler for Allen-Bradley 855HM series sealed metal horns for volume reduction.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable muffler for Allen-Bradley 855HM series sealed annunciator/alarm horns. These horns are designed and intended for industrial environments and have a range from 107-119 db and can be too loud for some situations. I designed this for use in a nuclear training simulator that is required to be identical to the actual plant. In the actual plant the horn for the control room alarm system is mounted behind several industrial panels and has an absolute volume of 55 db at the control panel. In the training simulator, the alarm is mounted behind a thin panel, and has an absolute volume of 98 db at the control panel even at it's lowest setting. By using this muffler, I was able to reduce the absolute volume to 55 db to match the reference plant.
The file is designed to be printed as oriented without supports at either all walls or 100% infill. The cone is slightly oversized to the bell of the horn, allowing it to make a tight seal and held by tension from the mounting arms. The case crews will need to be replaced by M4x40mm pan head screws, and a dab of blue (temporary) LockTite is recommended to avoid vibrational backing out.