1 / 1
OXO Grater Base Bowl (76×116mm) – Remix — zdjęcie 1

OXO Grater Base Bowl (76×116mm) – Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grater base bowl redesigned to fit OXO graters with a 76×116mm base. Clean, simple, and practical.

Ocena
0 / 5
Polubienia
12
Pobrania
7
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a grater base bowl designed specifically for OXO brand graters with a 76 × 116 mm base.

I originally liked the All-in-One Grater Base Bowl by Chopper Originals, but the sizing didn’t match my grater. Instead of forcing it, I redesigned the model from scratch to properly fit the OXO grater while keeping a similar overall look and feel.

The result is a clean, simple bowl that:

  • Holds the grater securely

  • Catches grated food directly

  • Makes prep and cleanup easier

Printing Notes

  • Recommended material: PETG

  • No supports required

  • Print settings can be standard

⚠ Food Safety Notice

3D printed parts are not food-safe by default.
Use at your own risk. If you plan to use this with food:

  • Consider food-safe filament

  • Avoid high heat

  • Clean thoroughly

  • Replace if damaged or worn

This is shared as a remix out of respect for the original concept, but the model itself was fully redesigned to fit OXO grater dimensions.


☕ Support

If you like this project, toss a coffee my way — it keeps the printer fed with filament and my workshop stocked with nuts and bolts!
https://buymeacoffee.com/jvdesign

Tagi