Rugged Box (Parametric) for Amprobe AM-510 200x100x80
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged Box Paremetric For Amprobe AM-510 Multimeter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was wanting to have a good place to store my Amprobe AM-510 multimeter. None of the premade Rugged Box Parametric files fit. So this is my first attempt using Fusion360.
Credit to another box comment for the pocket having no walls (top or bottom) and a honeycomb infill because it makes a nice pocket for the probes. Though if I really wanted to, I'd go back and make the pocket 30mm instead of 20. It friction fits just fine and gives some flex for the multimeter that is just a bit taller than the bottom of the box. There is a little room top to bottom when the multimeter is in it. Does not look to cause problem for storage.
I had to use m3x20 for the latch bolts but everything else worked fine with m3x15.
Usually I am at the mercy of others files. So I am glad I took the chance to learn about Fusion360 and Modify Parameters function of the Whity box that was easy to modify. Hope this helps someone else. Happy to help in the comments section.
I printed mine on a Bambu X1C in ABS generic red and blue. Please excuse the glue on the lid.