Bambu X1C Hot-end Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mountable Holder for Bambu Labs OEM Hot-end(s) [0.2mm / 0.4mm / 0.8mm]
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Rather Than Always Trying to Fit the Un-used Hot-end(s) Back Into the Small Packaging Bambu Sends Them In, I Designed This Holder, Which I Have Double-Side Taped to the Side of My Bambu X1C. Magnet Pockets or Screw-holes Could Very Easily be Added, but I Did NOT do This Due to the Countless Size Variations of Each.
This Design / Option Allows for a Quick Grab When I'm Swapping Hot-ends, While Also Cooling in a Safe Manner, All While Being Out of Sight.
NOTE: The Measurements I Took on the 0.8mm Hot-end Fan Showed This to be Slightly Larger Than the 0.2mm and 0.4mm. I'm Not Sure if This is Consistent with All of Them or a Possible Production Inconsistency, but Something to Mention.
The File Should Easily Allow for Modification to the Numbers in Any Slicer Software, so by no Means is This Design Only Applicable to the Sizes Shown.