1 / 3
Picoblade to JST Splitter for SV08 toolhead board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JST XH to Molex Picoblade adapter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The metal spacer needs to be pressed into the mounting hole. It's a tight fit. The rest of the build instructions are the same as the original model this was remixed from.
This is won't fit the stock tool head - I am using the board on the backside of an Orbiter extruder motor.
