1 / 1
BIGTREETECH ADXL345 Prusa MK3S+ Bed Mount (4-40 Screw)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed mount for the ADXL345 for Klipper calibration.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design mounts the BIGTREETECH ADXL345 2.0 accelerometer board to the bed of the MK3S+ or any bed that is under 5mm thick.
This design uses 4-40 screws that screw directly into the 3d print.
