cheap dresser corner brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a brace to reinforce the cheap dressers that don't include any anti racking bracing.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
I got a closet dresser from amazon and was surprised that the only racking support were 6" cardboard triangles you staple to the corners. The dresser immediately racked and made the drawers jam.
I made these braces to reinforce the corners, only 2 are needed (mirror one so the tab is on the right side) and they greatly increase the strength of the dresser. There's also holes included to screw the brace to the wall to act as an anti tip brace.
Printed in PETG for flexibility and durability but PLA should work too.