Mini-Z Short Course Truck 4WD | Mini SC24 | 1/24 RC Car (With Assembly Guide)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printable and DIY RC car with no special equipment or CNC parts.
- Ocena
- 0 / 5
- Polubienia
- 12
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the body is sct... :D
3 years ago I came up with an idea of a challenge, to make 99% printable small RC car to play with at home.
I spent now 20 days in row designing and printing every day prototypes to get to this point when I can say It is finished and someone can print it as well.
It is printable on Stock Bambulab P1S with no extra modifications and most of the parts are PLA/PETG. Didn't test it on other printer, but I expect it to be possible to print on anything precise enough with 0,4mm nozzle. Only for the power gearing and motor mount I used ABS-GF so it is temperature resistant, But it works even printed from PETG. Use Random seam orientation so the rotating parts won't be asymetrical.
This paid version contains detailed 40 pages of assembly guide. You can find version without the guide for free, but it will be bit of a challenge to assemble without it.
You can find here also some extra parts from still ongoing development and updated main parts.
Free version here: https://www.printables.com/model/1542889-mini-z-short-course-truck-4wd-mini-sc24-124-rc-car
But I think we will see each other back here soon. :)
Here are necessary settings for slicer:
for all parts: seam orientation - random
Small TPU parts printing settings:
95A TPU
100% infill
0,2mm layer height
3 perimeters
Wheels TPU parts printing settings:
95A TPU
0% infill
0,2mm layer height
1 perimeter
4 bottom layers
4 top layers
Assembly parts:
PETG/PLA
100% infill
3 perimeters
0,16mm layers height
1mm XY separation for supports
Here is list of what you need for the assembly:
What tools you’ll need:
•Drill
•2mm drill bit
•4mm drill bit
•Steel file
•Sand paper (400 grid)
•Good comfortable screwdriver (as there are a lot of screws)
•Knife
•Tube Cutter
What hardware you’ll need:
•M2 screws
8pcs M2x4
10pcs M2x5
18pcs M2x6
10pcs M2x7
20pcs M2x8
6pcs M2x10
8pcs M2x16
•M3 Screws
6pcs M3x20
•Bearings:
1pc 4x9x4mm
4pcs 8x12x3,5mm
10pcs 3x7x3mm
2pcs 2x6x2mm or 2x6x2,5 or 2x6x3
•4mm brass or aluminum tube with 3mm inner diameter (170mm used length)
•Superglue (CA Glue)
•Silicone grease
•Steel spring wire (0,8mm suggested)
Upcoming Improvements:
Test of these tires: https://www.aliexpress.com/item/1005006334816658.html
Test of 1625 3500KV inrunner motor (might be the best compromise)(ITS NOT it is too slow)Experimental Axial Ball Bearing differential
Here are some short videos of how it drives:
LATEST VERSION PERFORMANCE:
TBH I don't like the driving behaviour with the inrunner 1625 4800KV motor (but it was really cheap). The max speed will be probably higher, but the motor gets hot until the end of driving and there is not much torque for an offroad car. If you can, I would recommend to modify a 1404 or 1505 quadcopter motor with replacing the shaft for longer one, It has much more torque.
Updates:
31.12.2025 Reinforced Wheel CV joints
1.1.2026
Reinforced canopy near the holes
Nicer Front Bumper
Corrected typos in instructions
Recessed shock absorbers to give more space
improved fit of angle gear
2.1.2026
Cooling vent for motor in chassis plate
Wheel hubs with customizable steering angle (But with too much angle the dog gone might fall out of the CV joint.)
TPU Shock Absorbers added to make this frame even more printable.
Gear cover added
3.1.2026
Added Toe In/Out set
9.1.2026
higher shocks mount to allow 32mm 1/24 oil shocks available on aliexpress.. I would recommend to use it even for the default setup, as it allows the shocks to be in line with the force vector.
13.1.2026
Rubber tires for Kyosho Jimny (42mm diameter) fits perfectly on wheels for this model. I will add just a little bit of details for it to be perfect https://www.aliexpress.com/item/1005006334816658.html
14.1.2026
Wheels for Jimny Tires added
Steering arms with angle limiters added as occasionally wheels got pushed in 80% angle and the dogbones jumped out.
20.1.2026
Added mounting bushings for oil shocks https://www.aliexpress.com/item/1005008960066693.html
24.1.2026
as tires for Kyosho Jimny are too grippy and oil shocks mantain perfect contact with the track, I had to improve the geometry of arms to add negative camber and add 3mm to do the lenght of the arms. because the car was rolling over the roof in every tight corner othervise. So here is a file named Racing Set and Racing Set 2 if you want to either use spacers or wider arms. It improves stability.
25.1.2026
12T pinion gear added to 90 percent assembly. Great for outrunner motors.
motor mount corrected on the 90 percent assembly.
Baseplate modified to block arms from swaying under a limit.
1.2.2026
FPV/TPV mount for Walksnail Mini V3 with 9g servo for changing view
