1 / 13
Helicopter Mi-8, Mi24 Collective
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is inspired by the Mi-8, Mi-24, Mi-35 collective. It fits onto a Virpil/Thurstmaster (Warthog/Cougar) base.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 361
- Wydruki
- 2
- Wyświetlenia
- 3872
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (1)Kolekcje (99)Powiązane
I haven't printed this last version of the part with all the switches, yet. Please share your results if you print it.
Don't forget to like and comment.
This collective grip has:
- 3x axis
- 1x 4-way hat switch
- 4x press-buttons
Print:
- Printed in PLA
- The grip and brake pad are printed in TPU
Materials:
- 1x rotary potentiometer
- 1x joystick module 5-pin KY 23 PS2 without the circuit board (Arduino UNO starter kit for instance).
- 3x press switch (hole diameter is 16mm)
- 4x mini press buttons (6x6x4.3 momentary button)
- Arduino Pro Micro or Leo Bodnar
- 160mm metal pipe (outer diameter 6mm, inner diameter 5mm)
- 180mm threaded rod (outer diameter 5mm)
- 1x M5 nut
- 2x M3 nuts
- 6x M3x16mm bolts
- 1x M3 x10mm bolt + nut
- 16x 6mm diameter ball bearing
Tutorial video about the electronics
buttons:
potentiometer/axis:
Notes:
- 3D-printed plastic isn't as resilient as the grip.
If you can make the structural parts out of resin: do. If it's not an option: use PLA or better, choose at least 90% infill and print the parts with an angle (potential crack to filament layer). Adapt the joystick response curves so you don't yank your stick like a mad man. Then it'll be fine.