Motor Protection for Gardena Hauswasserwerk 5000/5 Eco
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor Protection for Gardena Hauswasserwerk 5000/5 Eco
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom-designed motor cover for the Gardena Hauswasserwerk 5000/5 Eco.
I designed this part because the original motor area is exposed and offers little protection against dust, dirt or accidental contact during maintenance or operation.
The cover is purely functional: no decoration, no unnecessary geometry — just a clean, purpose-driven design that fits the motor housing and can be printed easily on standard FDM printers.
What this part does
Protects the motor area from dust and debris
Reduces the risk of accidental contact with moving or hot parts
Simple, robust design for long-term use
Easy to print and mount
Design philosophy
This part was designed as a tool, not a toy.
The focus is on:
Practical use
Simple geometry
Reliable fit
Easy reproduction
No support-heavy shapes, no gimmicks — just a solution to a real problem.
Printing Recommendations
Material: PETG or ABS recommended (heat and moisture resistant)
PLA possible, but not recommended for long-term outdoor or warm environments
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 20–30%
Perimeters/Walls: 3–4
Supports: No supports required (depending on printer orientation)
Installation
Mounts directly onto the motor housing
No modification of the pump required
Check clearance before operation
Test fit before continuous use
Disclaimer
This is a custom, unofficial part and not an original Gardena component.
Use at your own risk.
Always ensure proper ventilation and safe operation of the pump.