[IL.00] K1 Max Heatbed for Voron 310*310 Buildplates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to get rid of Creality's own proprietary buildplates.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Voronic K1 | IL.00 Lineup
It took a year to present this just for you.
If you haven't, you probably want to see my bed frame to take even more effect with the bed.
It will take 1.2 kg off the Z assembly.
Thanks a lot for the original creator: If you didn't, nor would this!
There are sketch files, so feel free to use them to make one yourself.
I feared that I couldn't repair it after the plates were discontinued.
Due to their own type of screw mounting, I made it universally compatible with ANY 310*310 plate, completely eliminating my fear.
They're now friends!
2.4 (300 mm)
Trident (300 mm)
Any printer with a 310*310 bed and/or buildplate installed.
It is 6 mm thick.
It's way harder to warp.
Stock bed is 3 mm thick, which you probably wouldn't wanna go back to.
CRUCIAL:
The stock 310*315 accessories will no longer fit.
You'd probably want to switch to a Voron PEI plate.
PLEASE DO NOT BUY 305 PLATES. IT STRICTLY HAS TO BE 310.
Due to Voron having so many different sizes of heatbeds, many get confused.
Be sure that you are buying a 310*310 BEFORE you do it.
Changelogs:
[Done 12/31/2025] Initial release.
[Done 1/1/2026] Happy new year!
[Done 8/25/2026] V2: CNC-focused bed guides + two screw holes for extra stability
Scrapped:
[Scrapped 1/1/2026] CORE One L buildplate
Too long in Y(305 mm) and X(305 mm).
310x310 was more common than 305
[Scrapped 8/23/2026] 305x305: I didn't really like it + silicone heaters are too small
What to have before starting:
4x Sheet Jigs
8x Jig Pins (They'll be superglued later)
[V2-specific / if you want to save money) M3*0.5 tap, clockwise
1x Voronic 310 Bed
This STRICTLY has to be made out of Aluminum 6061.
1x Heater Sheet (Stock K1 Max type. I designed the bed for this.)
DO NOT RECYCLE SILICONE HEATERS. BENT TRACES WILL SHORT YOUR BED.
YOU SPENT $75+ TO UPGRADE YOUR BED IN THE FIRST PLACE.
YOU WILL NEVER SPEND TWICE IF YOU CARE ABOUT SAFETY.
1x 310*310 Magnetic Sheet (Necessary for PEI sheets!)
This will cover up the screw holes. Please insert your screws first.
I recommend M4*30 for metal springs, sometimes M4*25 for silicone / rigid bed mounts
1x Left and Right Plate Guide (Print one for each guide.)
Titanium or aluminium guides will basically last with the bed, which is forever
You can even use ABS if you only strictly print PLA (don't)
I used PC-CF and it still deformed over 4 months of use
Therefore you want it to handle all that shock
Caution:
The plate guides have to be printed with at least polycarbonate. If not, they'll melt off due to the bed temperature. I recommend PC-PBT-CF, but often PC is enough.
You may also choose to use the PPS-CF, but be careful to check if you're really capable of printing it.
ABS is often NOT enough to hold itself at 110 °C.
ASA's warping is NOT good when it comes to a print this large.
They'll fit in your K1 Max when you arrange the parts like this:

The guides are based on your K1 Max.
It'll be worse when your buildplate is smaller than the 300*300.
You WILL use the jig more than once.
Any filament is usable, but be sure you're using only one filament for the entire jig.
