Qui-Gon Jinn's Lightsaber - Star Wars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build Master Qui-Gon's green-bladed lightsaber from Star Wars Episode I.
- Ocena
- 4,972 / 5
- Polubienia
- 665
- Pobrania
- 1743
- Wydruki
- 46
- Wyświetlenia
- 7606
- Oceny
- 36
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Here is my Qui-Gon Jinn lightsaber design. I tried to get it as accurate as possible.
****There is a new version of this here that screws together requiring NO GLUE****
The shroud is the challenging part, so it may take some creativity to get the supports stable enough for the little prong shaped overhangs. It was too tall for my prusa mk2 so I split a section off the bottom and added those split parts for anyone who needs it.
I print everything at a minimum of 25% infill to give it a decent weight for a plastic lightsaber.
To get the seamless circular pattern on the emitter, red button, and pommel, set your top/bottom infill pattern to Archimedean chords in your slicer.
For the main grip, ‘ironing’ was enabled in prusaslicer to smooth out the top surfaces.
Compatible with my Covertec belt clip here: https://www.prusaprinters.org/prints/155731-covertec-belt-clip
***** If you like my designs, please consider supporting me *****
PayPal: https://paypal.me/jonesmikea
Ko-Fi: https://ko-fi.com/unimatrixred
Buy Me A Coffee: https://www.buymeacoffee.com/jonesmikea