1 / 3
Gospel Coin Spinner Tract - Print-in-Place — zdjęcie 1
1 / 3

Gospel Coin Spinner Tract - Print-in-Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inner ring spins inside outer ring, while cross spins within inner ring. Fun fidget spinner with a good message.

Ocena
5 / 5
Polubienia
40
Pobrania
203
Wydruki
3
Wyświetlenia
919
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This prints entirely as one (print-in-place), both the outside and the cross spin like a fidget spinner. There is also a spot in the model for two 1mm x 6mm magnets in the cross to embed if you'd like as a fridge magnet.

For fusion 360 animation see here: https://youtu.be/urmyK8OauLE

Bible verse on 3D printed coin is:
https://esv.org/romans6:23
"For the wages of sin is death, but the free gift of God is eternal life in Christ Jesus our Lord."

Use these to spread the gospel on sign posts or anything metal.

I used PLA 0.2mm on my Prusa Mini Plus (54 minute Print). Infill can be whatever, no supports or rafts needed. Print at 100% size.

Try adding a drop of any kind of oil to the circle spinner and it spins quite well.

Print Settings

Printer:

Prusa Mini Plus

 

Rafts:

No

 

Supports:

No

 

Resolution:

.2mm

 

Filament brand:

overture

 

Filament material:

PLA

 

Tagi