Wood Clamp Rack Craftsman Irwin Harbor Freight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Racks for hanging woodworking clamps
- Ocena
- 0 / 5
- Polubienia
- 67
- Pobrania
- 266
- Wydruki
- 0
- Wyświetlenia
- 1369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
I needed a storage system for my woodworking clamps. I had a variety and there wasn't anything I could find that was what I was looking for so I designed my own. I made them out of carbon fiber PLA for stiffness. There are different models for bar clamps (F-style) and small and large squeeze clamps. They are printed with 0.2mm layer height and I recommend 25% or more infill grid or honeycomb. The holes are sized for normal drywall screws. If you're hanging long (heavy) clamps I would recommend to use a brace underneath for added strength. I used the CFS system for the color change but you could also just pause the print and swap colors if you're looking for the multi-color look.