Doctor Who Starry Night
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doctor Who Starry Night
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hueforges can be resized, only change the X and Y scale, leave the Z height the same.
Doctor Who Starry Night
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.4mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.76mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA+ Esun Light Blue Transmission Distance: 4.8
PLA+ Sunlu Sunny Orange Transmission Distance: 4
PLA Elegoo Yellow Transmission Distance: 5.6
PLA Elego White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Light Blue
At layer #11 (0.96mm) swap to Sunny Orange
At layer #15 (1.28mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest or
Border Only Colors.
At layer #23 (1.92mm) swap to Black or any color for the rest.
If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!