K1 Max - Super wide auxilary fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Porting has been adjusted to have very even air across the width of the plate. You'll need to remove the existing fan…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Porting has been adjusted to have very even air across the width of the plate. You'll need to remove the existing fan and use the drill template as shown in the pictures to create new holes. This will shift your auxilary fan slightly. The hole alignment is pretty close on the template. I believe I needed to open up a hole to give a little more slop to fit.
I'm currently working on adding a 2nd auxiliary fan to make the cooling incredibly even along w/ slower fan speeds.
Printed in PETG for a little more temperature resistance.
Category: 3D Printer Accessories
