Breville Coffee Grinder Receptacle - Pull Tab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily remove the grinder receptacle with this simple print.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This was made for the Breville BCG820BSS Smart Grinder Pro - it might work with other models but I have no way to test. This is one of two models I made to improve (I think) this grinder - see below for more details and a link.
I just got this coffee grinder, and so far it has one minor annoyance - the grinds receptacle is held on with a magnet and is a little bit difficult to remove. This little tab makes it easy to grab with one hand and remove the container.
This model worked fine for me, but it left still one more minor annoyance - the need to unscrew the receptacle lid to empty the contents. Yeah - I know - not the world's biggest problem, so admittedly a very minor annoyance, but still . . . My solution was to design a replacement receptacle lid which enabled the container to be emptied without removing the lid. This is my preferred solution so far :
Assembly and Use
Simply slip the ring onto the receptacle from the bottom, with the tab positioned in the front (lip on the tab facing up). Position the tab opposite the fill opening. The ring will be a very tight fit, and will need to stretched to fit onto the receptacle.
Print Instructions
Print in FLEX (TPU) using the 3mf files provided, otherwise :
0.2mm layer height
3 perimeters
No infill
CAD
The OnShape 3D CAD files for this are here :