Parametric Cylinder Holder for 3DLAC Spray For Honeycomb Wall Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric remix for people who use 3DLAC bottles and Honeycomb Storage
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to get my 3DLAC spray can off the table and looked around for Honeycomb storage made popular by RostaP. I found this one by @thesambu and wanted to modify it to hold my aerosol can. It was 50mm so I bumped it to 54.5mm to hold the can.
If I was picky, I'd modify the diameter to 53mm to make a tighter grasp but it sits on the wall 99% of the time so it's fine. The height is 50mm. If it was in an area prone to bumping, I might extend the height to 75mm or so just for same safety of an elbow.
Printed PLA on Bambu X1C default .20mm settings.
Hope this helps others and welcome to feedback.