1 / 6
Protective plugs with magnet holder for Gweike M-Series CO2 lasers — zdjęcie 1
1 / 6

Protective plugs with magnet holder for Gweike M-Series CO2 lasers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective plugs with magnet holder for Gweike M-Series CO2 lasers

Ocena
0 / 5
Polubienia
4
Pobrania
75
Wydruki
0
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Protective plugs with magnet holder for Gweike M-Series CO2 lasers

  • Protect your CO2 laser mirrors from dust and debris

  • Soft compliant TPU material

  • Magnetic holder base for easy placement

  • 4x 12x5mm neodymium magnets

Printing notes:

  • Plugs and caps:

    • TPU is recommended for good fitment. 

    • PETG/PLA also works but not as well and might need to play with scaling.

  • Holder:

    • Magnet pockets are sized at 13mm x 5.3mm

    • Suitable for 12x5mm or 1/2"x3/16" disc magnets

    • When slicing, insert a pause at 6mm (layer 30 for 0.2mm layer height).

    • If you do not want to pause during printing, you can chop off the bottom 0.4mm when slicing and glue the magnets.

Magnets:

Tagi