Pantograph for scaling up using 608 bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mechanical device for scalling up/down of drawings/sketches. Now also fits Sharpies!
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 300
- Wydruki
- 1
- Wyświetlenia
- 2534
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
For construction of this model you will need:
5x 608 bearings
4x M5x15+ screw + 4xM5 nut
3x M3x 10,15, 20 + 3xM3 nut
one M3 and one M6 spacer
How to construct conection between arms: https://youtu.be/rPOF8rcytYY
Since you pobably won't find the exactly same "pointer" as I used, I made the hole for it a bit bigger (1.4 mm) and it can be furthermore easily edited in files "vnitr rameno vedl" and "vnitr vlozka" (EDIT: there is now a special file for use of a piece of 1.75 fillament as a pointer).
The scaling up ratios can be found on one of the photos.
EDIT: Now also supports Sharpies! - use file rameno_vedl_Sharpie
Print instructions
Category: Machine Tools Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: Yes
Resolution: 0,2
Infill: 15
Filament: Prusament PLA Galaxy black
Notes:
Only file that needs supports is "rameno vedl".