SEBO Vacuum Attachment Storage Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thing to help cleanly store SEBO vacuum attachments with the vacuum (designed for D4)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a SEBO D4 canister vacuum, along with two attachments (the turbo brush and the premium parquet brush) that do not have a place to stow on the canister. I usually store it with the power head attached (since it can hold the hose upright) but then these other two attachments just kind of .. go on the floor next to it. They don't have a home.
I designed this to give them a home. It slots into the groove on the underside of the canister; you can put the parquet attachment on the bottom (it has a hole so it locks on) and the turbo brush on top (friction fit).
I'm not the best 3D modeler and I wanted this done quick so it's not the best looking thing and it might break pretty easily; if/when mine does I'll tweak the design and re-upload. For now though, it works.
I have a D4 so I know it works with that. Looking at photos online of their other canister vacs, the E series (and I think the K series) have similar slots on the underside, so it might work for those as well, but I haven't tested. The parquet attachment might hang too low (it almost touches the ground with the D4). If you have one of the other models and you try it, post a comment with your results!