1 / 1
Poker Chip Display — zdjęcie 1

Poker Chip Display

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Display for 39mm circular poker chips

Ocena
0 / 5
Polubienia
6
Pobrania
19
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Show off your poker chips with this stylish and modular display kit! Print the combo of trays and bases you want to use, and some rings to float your chips above the bases.

  • Trays: multiple sizes to hold Bases in different configurations.

  • Bases: multiple shapes (where "Flat" is essentially the minimum Base that you could build off of).

    • Also contains a Riser block that you can stack to lift Bases higher.

  • Rings: nine different heights

    • Normal is 39mm circle exactly; this should work for most standard 39 mm chips.

    • Loose is +0.2mm and Tight is -0.2mm from 39mm; useful depending on filament type/properties, printer calibration, and/or slight variations in poker chip size.

Tagi