1 / 4
E3NG Nozzle Cleaner MOD
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold brass or silicone brush on E3NG by RH3D
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 341
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (31)Powiązane
This part uses the empty space on the rear linear bearing to mount a nozzle cleaning brush.
Two versions included:
Bambu A1 silicone wiper
Brass nozzle brush
No interference with motion and no loss of build volume.
Hardware required:
1× M3 heat-set insert
1× M3×16 (or longer) screw
