Scalable ejection-seat for L-39 Albatros jets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VS-1BRI ejection-seat for a L-39 Albatros scale 1:3.5
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 1084
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a modiefied version of my earlier posted ejction-seat for L-39 Albatros jet from customwings.cz.
This new version is an unmodified scale 1:3.5 seat and I don't use any screws in this version to make it easier to change the scale.
Though most ppl will paint the seat components I printed the different parts in three different colors. The color is part of the STL filename where gr is grey, sw is black and ws is white.
all parts are printed in Prusament PETG with original Prusa settings with following parameters:
Layer hight: 0,2mm
Infill: 30 %, cubic and monotonic
For PETG I would recommend 2-component resin. The four thin headrest rods are not very well printable which is why I use aluminium tubes instead (thickness depending on the scale). The purple colored parts (in the exploded-view) need supports, all other parts can be printed without supports.