Apple Magic TouchID Keyboard, Trackpad and Macally 10-key Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to have my touch ID keyboard, trackpad and Macally 10-key lined up on my desk.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to have my Apple magic touch ID keyboard, trackpad and Macally 10-key lined up on my desk and the trackpad to be below the keyboard like it is on my MacBook Pro.
All ports are available on top of devices so they could be USB charged while in tray. There is a void under the keyboard so that cable could reach the trackpad. Holes underneath device make popping devices out of mount easy.
Version of trackpad I have is the lightening one.
Keyboard is the touchID with lightening port for charging as well.
The main keyboard/trackpad component measures 286mm x 236mm.
If you have a smaller print bed you will have to get fancy and do some rotation/supports with your slicer.
I printed this on a Bambu H2D and used PETG as that is what I had on hand at the time. Since the tray is slightly angled you do see layers/ripples in the print.
Made this in tinkercard - link here if you want to tweak it for your own needs. https://www.tinkercad.com/things/84WCbq6z82S-apple-keyboard-accessory-connector-for-desk.