Riftbound Magnet kit - Might Token Dispenser [Outdated]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spring-loaded damage token dispenser that fit the tokens from the Riftbound Magnet kit.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1671
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Might Tokens not included (see post of the original creator)
While trying to practice with the FreeCad application, I designed this spring-loaded token dispenser for the Might tokens of the Riftbound Magnet kit. Is it over-engineered? Probably, but at least it looks cool on the table. I also included the FreeCAD file.
Features:
Compatible with 7.0mm x 19.0mm and 9.5mm x 19.0mm springs (the 9.5 provides more stability)
I used a cheap set of springs like this amazon set: https://www.amazon.de/-/en/dp/B07WFPPXXX
8 Slots total, that can each hold 5-6 tokens (6 tokens nearly compress my spring fully, so I recommend max 5 tokens)
Held together with 5 M3 screws, with max screw length of 12mm.
For this model I used M3x10mm screws
Works perfectly with FDM printers (PLA or PETG recommended)
Print settings:
Layer height: 0.2 mm
Infill: 15-25%
For the top part I use 5 walls (to battle the pressure from the springs trying to bend the top)
Supports: For the top model I used supports under the screw counterbore cutouts.
Nozzle temp: 200–220°C
Bed temp: 60 °C
This model is fan-made and not affiliated with the official Riftbound creators.