Nuk Perfect Match Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on handles for Nuk Perfect Match 227ml bottles so that your little one can hold the bottle themselves
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This model gives you snap-on handles for Nuk Perfect Match 227ml bottles so that your little one can hold the bottle himself/herself.
There also is a hour dial at its bottom that you can use to record when a bottle was prepared. I like to use the temperature indicator to point to the time on that dial, e.g. 10:30 in the example photo.
ATTENTION: As a parent you are responsible for the safety of your baby. Many filaments are not food safe, so only use this handle during supervised feeding. If your little one starts nibbling on the model, then better take it away.
Recommended print settings: 0.12mm layers and 4 walls for good snap-on strength
The handles themselves move a bit on the bottle, but they shouldn't come off on their own.
If that bothers you, then just add a rubber band around them to make them hold more tightly, or simply scale the model down by 1-2% for a tighter fit. I tried 2% and it works very well (long term results pending...it may loosen a bit again)
OnShape Workspace:
https://cad.onshape.com/documents/30d2d21c37ecd2106b177ec1/w/b054aec3beac4631c14b03c1/e/b6bdb9645cd016832a064779