Vent Open/Close test gcode for Core One plus

With the Prusa Core One+ (Plus), once you change the setting for vent management to "Auto", the printer can automatically open and close the vent as needed by the particular model being printed. I didn't see the gcode file posted anywhere online to test opening and closing the vent, so I thought I would share this (even though it is just a few lines of text.

Printables won't let me upload a gcode file with the M870 instruction for some reason, so just copy and paste this code into a text file called "vent_open_close_test.gcode" and print it on your Core One plus. When you select this file for printing, the printer will throw a warning - just tell it to proceed and print anyway. It will first open the vent, pause 15 seconds, then close the vent, pause 15 seconds, then open, pause, and close one final time:

; Vent Test for Prusa CORE One+
M870 O ; Open vents
G4 P15000 ; Pause 15 seconds to observe
M870 C ; Close vents
G4 P15000 ; Pause 15 seconds
M870 O ; Open again
G4 P15000 ; Pause
M870 C ; Close again
M117 Test Complete ; Display message on screen

The very first action in the file is "Open". Make sure that your vent is flipped around properly as per the Prusa upgrade instructions. If not, this file will appear to be working but will close, open, close, open... which is not what you want. This file should open, close, open, close. Hope that makes sense.