Spiral Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simply test print with a spiral vase. Easily makeable with "Spiralize Outer Countour" mode.
- Ocena
- 4,939 / 5
- Polubienia
- 378
- Pobrania
- 3702
- Wydruki
- 55
- Wyświetlenia
- 9925
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Spiral Vase
a test print for “Spiralized Outer Coutour” function.
Sliced with Cura, I did this print with my Prusa i3 MK3S printer. The filament I used was a generic grey PLA. No supports needed.
What does “Spiralized Outer Contour” (Vase Mode) mean?
Vase Mode is a Cura's experimental mode that prints the walls only, so the final 3D model will be empty. Another associated function, smooth spiralized contour, makes the filament looks more agglomerated, becoming visually almost smooth.
What are the best settings to print this vase?
In case you are using a Prusa i3 MK3S, just like i did, you can try this settings that worked fine for me. (Settings may vary according to your printer, the filament you are using and the ambient conditions).
For PLA:
Nozzle temp: 210 °C
Bed temp: 70 °C
Print speed: 60 mm/s
Spiralize Outer Contour + Smooth enabled
you can leave everything else as default.
Hope you enjoy your first print with this awesome design technique!