Roll Up Over-the-Sink Dish Rack - TPU Connector Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable TPU fix for deteriorated/broken stainless sink rack connector pieces.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The silicone connector parts for my over-the-sink dish rack had broken, so I designed a TPU replacement that made it useful again.
This is designed for racks using 17 6mm stainless rods, but can likely be scaled as desired. I have included a test piece print that should help determine if you need to scale up or down to fit your specific stainless rods.
I printed mine in standard 95A TPU, originally on an Ender 3, then again on Flashforge AD5X. This required me to design the part coiled to fit on the build plate. The walls have been made thin enough to allow the rack to sit flat despite this print orientation.
.STEP file included for remix purposes or to fit your specific use case.