VAM Arrarex Caravel 51 mm portafilter adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Portafilter adapter from Arrarex Caravel group head to standard 51 mm 2 ears group head.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are plenty of VAM Arrarex Caravel out there, some of them does not come with portafilter and due to the non-standard size of the machine group size. For these machines I designed this adapter which holds to the Caravel logo part.
The model is printed in ABS to support the high temps and with 25% infill. Once placed and tightened, there is no need to take it off. It also needs a Delongui EC 680 gasket (2€ on Aliexpress), and two 4mm screws.
I have a self-made gasket for replacing the original Arrarex group gasket, which is thicker than the original. If you are using a 1:1 gasket, you may need to make the upper funnel longer. Be careful since there is little room for the cup under.
Some models where the 2 ears of the Arrarex Caravel group head were designed, but this was a major break point, so eventually I decided to go with the outer subjection.
