Card stand for magnetic case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to hold magnetic card holders, learn more in the description!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Hey there collector!
I made this stand to hold these magnetic card holders that you can find on many sites like ali express or from name brands like BCW.
While the pictures may show an F1 card inside, rest assured that as long as you use a similar style card case it will fit.
How was it designed/why?
I designed this stand because I wanted to have the perfect angle on my cards to where cards with foil elements or refractors are able to display a great reflection. After testing a couple angles, I landed on 10 degrees.
How does it print/what settings should be used?
To print you will not need supports.
I recommend 100% infill as the model is already lightweight.
I print mine at 0.16mm layer height
My prints take 12 minutes on the snapmaker U1
These take a little less than 4g of fillament
It can be printed with any non flexible material, like pla or petg